Quote:
Originally Posted by jhein
Thanks. hopefully it works out.
|
Do you have any other pix showing the p/s fender? Like a photo of the engine compartment from the d/s of the ta.
That would show you the area I mentioned. Not the end of the world problem, but if it's wrong...it just gives you some negotiating power.
The front fenders on the 70-72 TA's are replaced with later fenders quite often.[/QUOTE]
Here's a pic of the p/s fender from the d/s. The later fender should have a raised platform with two holes for the brace, is that right?
QUOTE
Yes, you're totally correct on that description. You have a proper "flat" area of the fender in question.
Sorry, it looked raised in the other pix from that bad angle.
As said by other members, You must look at, or have someone look at this TA in person!
It's really the only way before spending any money. Pictures can hide so much.