Quote:
Originally Posted by pokey1
Avman will answer as well as I can. Can get a few pictures and post if you wish..
Yes the rear axle assembly was already here before I decided to go with the QA1's.
Did not discuss with QP, in fact had QP add the lower control arm bracket (extended with additional holes) for adjusting angle. Rear end was set up for normal shocks.
The QA1" mount in the same location as the stock shocks. There is a beefy bracket that mounts on the frame for the top of the shock with a third bolt added for attachment to the frame. Easy to install. There is also a beefier bracket that mounts to the rear end shock mounting hole with a ball bearing swivel mount that attaches to the shock.
|
I saw the brackets in the installation video by QA-1, but wanted to ask. I am sending you a PM.