Quote:
Originally Posted by FrankieT/A
Not to mention all that weight on four lower shock bolts...
|
when using the QA1 a arms shock crossbar on the bottom comes off and has a cross bolt that bolts to an additional flat plate that bolts on top of another plate on the lower a frame. 4 bolts keep it in place. Thanks for the reply. I had to look at the kit to see. If you use the stock a arms I see you still use the crossbar on the bottom with 2 bolts but the shock does sit on top of the a arm instead of the bottom like a stock shock.
__________________
 1967 GTO, 467 roller motor, e heads ported, tremec T56 magnum 6 speed and
9" done. EZ EFI 2.0 with FAST dual sync distributor and separate nitrous system done. Track is at 4300 ft elevation. so far a best of 11.95@116. Suspension now getting dialed in...tubular front a arms with dual adjustable coil overs HR Parts n stuff rear bar and whole car lowered 3 inches..
Last edited by pokey1; 11-25-2019 at 11:53 PM.
|