Quote:
Originally Posted by Scott65
How specifically did you arrive at the 7 degree number? The answer to how much can be different. The old Southside bars recommended ~5 due to the movement they caused, and for the angle to be close to inline under power. I think mine's at 2.5 negative, static right now with stock location points.
Also do some checking on your location points and you can use some of online calculators to figure instant center and antisquat if you haven't already.
|
I rounded it off to 7 actually. I came up with 6.66 The way i did it was: trans yoke was 3.30 going down towards the rear and drive shaft yoke was .70 going down towards the rear. I subtracted .70 from 3.30 = 3.23 . did the same at the rear yoke and shaft yoke. Shaft was .70 . Rear end yoke was 3.43 going down towards the trans. added 3.23 to 3.43 = 6.66 degrees? lol
I read this and tried it. I have no idea if its right..