I believe those two wires in the first photo are supposed to be two separate wires from two different sources. The yellow/blk I believe should be full 12 volts, the other is a resistor wire and should begin black with red or pink stripe. Not sure about the colors, but they shouldn't be spliced together. The full 12 volts is for cranking, and the resistor wire is for run, both power for the coil for different purposes. That being said, you should only need one now, for the msd, and it should be full time, full 12 volts. Hopefully someone else will interpret your coil resistance values.
__________________
'65 Tempest 467 3650# 11.30@120.31
Last edited by Scott65; 09-08-2019 at 05:52 PM.
Reason: Clarification
|