[Zappa's 68]

Thanks for the info....just don't get why it's semi circular??

Originally Posted by ddcrank

That half circle harness connector has a slot in it that gets a plastic spade. The plastic spade is small and has a square plastic channel molded on it. That male plastic channel on the spade slides into the female channel on the half round wire connector. The harness then goes on top of the steering column support and the plastic spade goes through a predrilled hole on top of the steering column support and faces down. So when you look up from the floor all you see is the black plastic spade sticking through the hole directly over the steering column
the half round connector is on top of the steering column support out of site.