Hi guys! This time I read the forums at length and discovered fuel pump issues are everywhere. Thought the problem was with my very dirty 2bbl Rochester 11/16" throttle bore carb. Besides a carb rebuild, I'm putting on another fuel pump. Bosch used to build one but, based on availability, now it's either a Edelbrock or Carter. Hope it's ok to show product urls:
http://www.jegs.com/i/Edelbrock/350/1713/10002/-1
http://www.jegs.com/i/Carter/180/M6907/10002/-1
The issue seems to be something called high or low cam. The cam is on the pump lever arm. So, since my 389 w/2bbl carb is*a base engine: Will either of the above work?
Also, cannot locate a rebuild kit for the carb. Any ideas?
Many thanks!