Quote:
Originally Posted by tom s
I dont think anything fits Lynns heads from a factory V head.Tom
|
This is totally not true. It is also the third time I have had to rebuke this statement. Tom received serial number 002 castings. He knew it was also before any QC on the heads as he was going to have his cylinder head man address any issues. We had a few that were all easily corrected with additional machining which we did to mine and one other set.
Tom so graciously sent a set of his stock RAV reproduction guideplates. and we sent huge efforts to be sure they all matched. We also made sure all the rocker studs matched the stock configuration. We were so grateful for Don Chapman for his stock intake to properly match the intake runner flanges to the stock OEM intakes.
We also made the intake flanges that can be milled for short deck blocks! We have gone to considerable expense, time, and technical resource to make a direct replacement. I hope this clears up this issue.