72cc alum round port combo?
I originally intended to build a +.065 400 using Speedmaster 72cc round port heads. I have been told the ports are really too large for this application.
My question is, what engine size combo would best use “as cast” 72cc heads? If I went to a 488 stroker wouldn’t the piston dish size become an issue? How many cubes are needed to make best use of these heads? What would be an effective combo to build somewhat easily?
I don’t have car in mind yet but for conversation let’s say a 3600-4000 lbs fun driver that will run 11.50’s
A streetable gear or an OD transmission & stiffer gear if required by engine size.
Any thoughts would be welcome!
Murf
Sent from my iPhone using Tapatalk Pro
|