View Single Post
  #1  
Old 10-12-2020, 10:45 AM
NeilZ NeilZ is offline
Junior Member
 
Join Date: Oct 2011
Location: Marietta,GA
Posts: 21
Default 68-71 Miscellaneous Parts (30066)

All this stuff is in new or like new condition and been kept inside the house.
I inherited most of these with the car. Only USA shipping. Most shipping is
pretty expensive these days, but some prices that say shipped include it. If
you are West cost I may add 5-$10 depending on size and my mood that day. I
have pics so let me know what you want to see. Cash, check, money order, no
Paypal. Marietta 30066

Not satisfied with anything except glove box, send it back for refund.

1. Kick Panels with 60W speakers I think came from OPGI : $120 shipped
* Speaker gets in the way of getting my left foot in/out since my hand
controls below steering wheel limit space.
* Passenger side had a very minor crack maybe 1/4" at piece that sticks up.
This does not affect the sturdiness - seems same as Driver
side. I went ahead and put 3M glue on back as precaution.
* Driver's side has light marr/scuff from parking brake getting it out.
* Neither speaker has been ever hooked up. My Lemans still has non working
AM radio so I can't tell you how they sound.

2. 68 Tempest front parking lenses, new : $50 shipped
* don't know if OEM or repro ?

3. Lemans 'Sport' emblem, New repro : $30 shipped

4. 68-72 glove box cover only, not metal back : $15 shipping cost
* I painted back and taped it off. When I pulled tape some paint 'dots'
pulled off the front. Probably just needs some vinyl paint.
* hinge good, looks like mounting holes were elongated by someone.
* when I drilled out rivets, drill size did not affect plastic rivet holes

5. Holley 4150 fuel regulator mount, new : $30 shipped
* includes some fittings from carb to regulator.
* Does not leave much room left if you have vac secondaries and choke.

6. Frt/Rear Black Door panels, new, unassembled, 70 GTO/Lemans :
* They go together $150 + shipping/insur (oversize box?)
* you'll need to reuse your upper curved cardboard, add lock button trim,
lower trim, and mounting hardware
* back side looks to have all punchouts for regulator, handle, rest, etc. A
bit of work but may save some money.
* 16 lb. box

7. Frt/Rear Black Seat Upholstery (70 GTO/Lemans/Tempest) :
They go together $200 + shipping/insur (oversize box?)
* PUI brand from OPG, new, still in original, unopenned bags with part#
* front buckets :
BKTS GTO 70 BLACK 'S' 70GS10US
* rear bench
CPE GTO 70 BLACK 'S' 70GS10CS
* 25 lb. box

8. Summit? billet distributor, about 1,000 miles. Pontiac 326-455
* $100 + shipping/insur
* Cu/Silver mech advance springs/wts (Moroso, I believe). All in @3200 is
what my notes said.
* adjustable vac advance set for 12 degrees (max is 16)
* Cap Has Brass contacts, looks to be a really good quality distributor,
and ran good. Since the contacts are brass I am not certain it's a
Summit because they currently show metal contacts.
* Ran good but car shut down randomly. Swapped to a Pertronix and car still
shuts down so it's not the distributor. Don't need 2 and I am not swapping
back.

9. Pontiac wire looms : $35 shipped
* one has slight bend out at last block but probably not noticeable when
wires are in place.
* these require custom length wires which is why I am selling. I just had
put new wires in and not buying more.


Neil

__________________
1971 Lemans, Wht/Blk, 400/TH400 2-brl, frt. disk kit, HD -2" spindles, PST, UMI trailing arms/sway bar, Edlebrock, Holley 650, Eaton 3.08, still in progress
1976 Olds 442, 350/TH350, Eldelbrock RPM and 600cfm, headers, flowmaster 50's, PST HD suspension, Catapaults