Got the new radiator installed. Made up AN fittings for the power steering lines. Found out that the new pump does not come with flow valve. Ordered new flow valve and installed. Had to find hoses for the radiator. Found the hoses and got them installed. Filled the motor with antifreeze. Plumbed the fuel to the rail. Installed the ECU. Ordered and installed a new lokar throttle cable. Installed trans dipstick. Filled the motor and the trans. Filled the tank with fuel. Did the initial setup on the terminator. Checked for leaks and started the motor in the car first time. Open headers
was nice and loud. Had to add temporary extensions to the headers to get the Wideband to read right. And was able to finally back the car out under its own power. Which is always a good feeling.