I use and prefer the stock Felpro pan gaskets for the sides and timing cover but cut my own rear gasket as shown in the pics.
Not one drop of oil gets by this set-up and very little silicone is used anyplace, just a drop in each corner and good to go.......
__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
|