Quote:
Originally Posted by Cliff R
I use and prefer the stock Felpro pan gaskets for the sides and timing cover but cut my own rear gasket as shown in the pics.
Not one drop of oil gets by this set-up and very little silicone is used anyplace, just a drop in each corner and good to go.......
|
X2. This is basically what I do also. I use the "black" Felpro or Butler side and front gaskets. I use the early factory cork piece across the rear main cap. I never use the rubber 3 tab or 5 tab rubber pieces across the rear main cap. That is only asking for problems.