I found out to remove pulley you can weld a nut on the end of the pulley and put a bolt in the nut to pull it off the water pump shaft.The only thing I can think of to install new pulley on would be to drill a hole into water pump shaft and tap it to pull the new pulley back on but dont know if you can drill it or how deep to go into shaft.The only other way would be to remove water pump and press the pulley on with a press but Id like to not have to remove the water pump.If anyone else has any ideas please let me know.thanks
__________________
1969 Matador Red GTO Judge,1999 Ram Air Trans Am,1998 Daytona Pace Car Grand Prix,1959 Bonneville,2004 GXP Bonneville.
|