John, I checked both the old contact ring wire and the NOS one I have; there’s no pulling that wire off of the contact ring, as it’s a crimped on connection covered in insulation. I’m going to try my idea of running some 16 gauge wire in there as a test and if that works I’m going to cut the NOS wire, pull it through, and then reconnect it using a crimp connector. I wish I could see another way, as I hate the idea of cutting a NOS piece like this but I don’t know what else to do short of pulling the entire steering column. And, even if I did that I’m still not sure I could get that wire fed down through the column with the connector attached to it.
__________________
Save yo Confederate money, boys, the South is gonna do it again!
Pecosbill
|