A lot of great info here! I will answer a few questions:
- I do have a driveshaft safety loop installed.
- U joints have about 5k miles on them
- fuel system is a walbro 255 in-tank electric pump, 6-an feed line, regulator and 8-an return.
I'm doubting the wheels will fit my car anyways but figured if ask. Im sure my 60-ft times will be horrendous as i have no desire to launch the car hard and break anything. My goal is to drive it there and drive it home. My plan is an aftermarket 12bolt or 9" in the future, jist not in the budget now.
I really dont know what to expect out of the car but i would like to see mid 12s, even with an expected poor 60'.
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears
Last edited by 67gtospud; 07-12-2020 at 11:02 PM.
|