View Single Post
  #31  
Old 11-14-2007, 07:52 AM
scotzz's Avatar
scotzz scotzz is offline
Senior Member
 
Join Date: Nov 2007
Location: North New Jersey
Posts: 194
Default

Quote:
Originally Posted by b-man
The '64 -'65 Pontiac Tempest 215 six-banger is really a Chevy engine through and through. It has 'PONTIAC' cast into the side of the block, but other than that it's the same as a Chevy 230 six (same family as the low-deck 194/230/250 Chevy, the truck 292 has a taller block) except for the bore size.

The Pontiac 215 has a 3.750" bore, the 230 has a 3.875" bore, both have a 3.25" stroke crankshaft. Carb, air cleaner, cam, distributor, fuel pump, oil filter, etc. are all the same as a Chevy.

You can bet that if a '64 -'65 Chevelle six-cylinder exhaust system is available, it will fit.

It's really easy to find parts for.
I suspected that it was Chevy based since visually it looks similar but I was suspicious after seeing Pontiac cast into the block plus the difference in displacement. That's a good tip on the exhaust and am going to research it again even though I couldn't find anything that cross-referenced the other GM intermediates. I've bid on two Hollanders on ebay so far but haven't been successful yet...........