Quote:
Originally Posted by Steve C.
I'm confused as to the final cubic inches involved.... some posts suggest 522 and others 535. What is the stroke and bore ?
If you bring back one or more copies of a dyno sheet it will indicate the peak torque rpm and peak power rpm, and with the TQ/HP numbers to report.
The 535 combination I linked here in my post #10 with the 'same' cam, similar cylinder heads and a Torker II intake with 850 cfm carb made peak torque at 4400 rpm and peak power at a low 5400 rpm. A 1000 rpm spread.
With a Victor intake and 1,150-cfm Dominator carburetor it pushed the peak power to a higher 5800 rpm. A 1400 rpm spread.
.
|
That's incredible - 650 all in by 5400.
Does it say what the compression is?