According to my service manual you should have a slight amount of "spring back" at the end of the levers travel, "not to exceed 1/8 of an inch". You can adjust that by turning that knurled plastic "turnbuckle" just to the left of the cable mounting bolt.
Edit: If that is the original 50 year old cable that's never been adjusted the turnbuckle may not want to move. Be careful to avoid breaking anything.
__________________
"I fishtail through the lanes, and I make my tires squeal.
Power at my feet, and glory at the wheel.
I wind the windows down, let the wind blow through my hair.
God knows where I'm goin' to, but me... I don't care."
Last edited by richardk; 11-24-2019 at 12:47 PM.
|