Some of them are just held on with 2-sided foam tape. If yours are, you're lucky. Some heat and a length of fishing line will get them off.
Many are pop riveted, though. If that's what you've got (and from your picture, it looks like it), you'll need to pull the rubber contact surface out of the aluminum carrier to expose the rivets. Then drill the rivets out. And then you're left with holes in your car.
__________________
keith k
70 Trans Am RA III / T400 / Lucerne Blue / Bright Blue
70 Trans Am RA III / M20 / Lucerne Blue / Sandalwood
70 Formula RA III / M21 / Lucerne Blue / Bright Blue
|