View Single Post
  #3  
Old 09-15-2020, 09:36 PM
cnc's Avatar
cnc cnc is offline
Ultimate Warrior
 
Join Date: May 2005
Location: London,Ont, Canada
Posts: 3,995
Default

Well I popped out the rubber insert for the molding ....and the trim is actually screwed on....managed to get most of the screws out but I will need to drill a couple ....

__________________
1973 Firebird Navajo Orange w/shaker,1973 400/461,1972 Intake SD CNC'd,1977 Q-Jet 800 CFM w/ Cliffs Kit,Tanks Inc PA4 255 Walbro intank pump ,-8an feed/return,RobbMc Regulator,RobbMc 40 micron filter,253 CFM 6x-8's w/H.S 1:5 Roller Rockers,SD Stump Puller H/R Cam 230/236 @.050 112 lobe separation 565/.570 lift,Crower Solid Rollers,28150 Hedman Headers,3" exhaust,full tailpipes,350 Turbo,9.5" 3200 Converter,3:42 gear,8.5 posi,C/E slide-alinks,Koni adj frt shocks,Best 12.18@110.55 Lookin for 11's