Quote:
Originally Posted by JSPONT
Some clutches need to break in if they are new. What clutch did you use
|
I used a autozone Ford clutch, 10 1/2 inch. When I was trying to install the transmission, I pushed it in 30 times and let it hang on the clutch disk. It took me about 20 days to get the transmission in. It may have distorted the disk. When in any other gear, it works perfectly. The shuttering isn't that bad, just annoying. The pilot bearing was too small in I.D. I had to drill out the inside of the pilot bushing to make it work. Fit pretty good.