If you want the easiest way to wire the car all you need to do is order the engine front wire harness for a G/A with the 301. You can get the harness from American auto wire & that way all you have to do is plug it into the fuse block & wire it the correct way to the Pontiac engine. All the wires will be in the correct location for the Pontiac engine. I did this on a full size Bonnievelle when I swapped a chevy engine to a Pontic engine in it. It make the wiring swap much easier. Then all you need is to move the motor mounts, frame mounts. The holes are already there for the swap. Pontiac drilled all the holes in the frame just in case they were to use a Pontiac engine in the cars.
|