We made a couple of dozen oversize plates many years ago for our own use. I never needed DAG-213, ESPECIALLY after a few conversations with John Sawruk.
Not at all difficult for a good machine shop to fabricate the oversize plates. But not worth the effort for only 1 or 2 pair. We made them 0.005 and 0.010 oversize.
No, don't have any left.
Jon.
__________________
"Good carburetion is fuelish hot air".
"The most expensive carburetor is the wrong one given to you by your neighbor".
If you truly believe that "one size fits all" try walking a mile in your spouse's shoes!
Owner of The Carburetor Shop, LLC (of Missouri).
Current caretaker of the remains of Stromberg Caburetor, and custodian of the existing Carter and Kingston carburetor drawings.
|