The first thing you need to do is get an infared thermometer and verify that your temp gauge is accurate. Verify it through the range: my SW is accurate through some temps, then reads 20 degrees high in warmer temps.
Since you asked what we think; I run a 195 thermostat, so I certainly don’t think that seeing 200 on the gauge is something worth throwing money and Saturdays at - especially at 110 degrees outside temp.
I do agree with the earlier suggestion that you add a fan shroud. That likely will allow you to remove the pusher fans.
__________________
 1965 Pontiac LeMans. M21, 3.73 in a 12 bolt, Kauffman 461.
Last edited by Chris65LeMans; 02-15-2020 at 01:12 PM.
|