If you have a Mechanical Fuel Pump, (I assume you do), Mount the Holley Regulator just above the fuel pump and no one will even know that it is there. You really only need to adjust the pressure once. I made a new supply line for the Filter/Tri-Power feed line with a regulator and used the other outlet to temporally plumb a fuel pressure gage. Once I had the pressure where I wanted it I plugged the "pressure take-off"
location. Course you could mount the gage under the hood somewhere kind of out of sight. Never in the passenger compartment though.
(The red plug in the image is the location where the fuel pressure take-off line needs to go. Then plug it later.)
Fuel comes into the bottom and out the two locations on the sides. Plumb the other location up to the fuel filter.
Tom V.
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
Last edited by Tom Vaught; 06-26-2019 at 08:39 PM.
|