| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-15-2024, 04:27 PM
|
|||
|
|||
Wiring fasterners/clips
Good day all,
Working at cleaning up some wiring in the engine compartment. I have a number of plastic push-through fasteners that hold wiring harness' in position. I'm not sure what the term for these items are called. Not sure where to find replacements. A couple photos attached. Thank you in advance.
__________________
1968 Firebird IAIIa 522 340 E-heads Northwind with XFlow TBI 4L80E 3.50:1 Rear 1969 Firebird 350/TH350 Mostly stock 2.56:1 Rear 
|
|
#2
06-15-2024, 04:29 PM
|
||||
|
||||
|
I think NAPA has a whole book of those kinds of things to choose from.
George
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum |
| The Following User Says Thank You to george kujanski For This Useful Post: | ||
|
#3
06-15-2024, 07:04 PM
|
|||
|
|||
|
If your not concerned with it looking exactly OE. I have some Christmas tree fasteners with a zip tie built into it. They should go in the same holes. I can send you some for a couple bucks and postage. PM me if interested.
|
|
#4
06-15-2024, 08:26 PM
|
||||
|
||||
|
Clip in the last photo, I believe, is in the Ames catalog under front end trim or front end section. I know I purchased them before, but cannot recall where.
The ones that are wrapped in the wire harness I do not recall seeing in a resto catalog, then again I haven’t looked for them. The suggestion of going to Napa or some other parts store is a good idea. I would recommend going to an old school one….one that still has paper catalogs, so if push comes to shove you could ask to peruse a buyers guide. One of these days I’ll break out all my Dorman, help, borg Warner ones from early 90s…veritable gold mines for finding oddball things like that.
__________________
costs too much |
| The Following User Says Thank You to rolling money pits For This Useful Post: | ||
|
#5
06-16-2024, 01:19 AM
|
|||
|
|||
|
So many variations of these as used by most makes in some form.
https://www.musclecarcentral.com/196...-p/wir-344.htm https://www.ebay.com.au/itm/193778269953 https://jcaparts.com/products/gm-inn...etainers-clips |
|
#6
06-18-2024, 01:04 PM
|
||||
|
||||
|
You can shuffle through a large list of them here, too:
https://www.clipsandfasteners.com/default.asp .
__________________
. 1970 GTO Judge Tribute Pro-Tour Project 535 IA2 http://forums.maxperformanceinc.com/...d.php?t=760624 1971 Trans Am 463, 315cfm E-head Sniper XFlow EFI, TKO600 extreme, 9", GW suspension, Baer brakes, pro tour car https://forums.maxperformanceinc.com...ght=procharger Theme Song: http://www.youtube.com/watch?v=7zKAS...ature=youtu.be |
| The Following User Says Thank You to HWYSTR455 For This Useful Post: | ||
|
#7
06-19-2024, 11:00 AM
|
|||
|
|||
|
I thank you. I did actually stumble across that website. I sourced one of the clip styles from them, another from a local parts store and yet another from the ss396 website. A little bit of a scavenging hunt but I think I've got everything I'm needing on order. A little hard to tell from some of the online photos and descriptions but I think I'm on the path to success. :-)
__________________
1968 Firebird IAIIa 522 340 E-heads Northwind with XFlow TBI 4L80E 3.50:1 Rear 1969 Firebird 350/TH350 Mostly stock 2.56:1 Rear
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
