Cam Question
I have a 463 ci lower end with Edelbrock heads.They flow 324@ .600-334@ .700.Intake is a Victor with a 1000hp carb.The cam I have in it now is a hydraulic roller and has a .600 lift with @ .050 248/254.My question is,If I put a solid roller with a .650 lift and 268/276 duration how much will it gain in power.I think right now,The way it is it has around 590hp.It has 11.4 for compression.The valves are 2.19/1.77.
I'm looking for opinions on this.I hope I didn't leave anything out.
Thanx.
|