[Joe's Garage]

They drop the price like this once in a while.
Grab some for less than $4 per quart delivered!

We did.

Here's a link:
https://www.amazon.com/Valvoline-20W...xpY2s9dHJ1ZQ==

[Bruce Meyer]

Thanks for the tip

[dataway]

Thank you, I just ordered some.

[64speed]

Subscribe to it and get that price for a case every 3 months. I just did

[roy381]

Thanks just ordered and subscribed!

[t money]

Originally Posted by 64speed

Subscribe to it and get that price for a case every 3 months. I just did

Subscribe and save you get a 5-15% off this time. But you pay what the going price is in the next time. But good find and thanks for posting.

[jotrout]

Amazon blocked the shipment to California. Ugg!

[64speed]

Well I can always get it this month then stock up every three months after. With as much as I already subscribe to I’ll get the 15 %

[PunchT37]

Just bought 3 cases. I`m gonna use it in my new roller cam 455. Most say it`s too heavy. I`ll see if it blows up.

Used 20w50 in my old 455 for a looong time. Still fine today.

[SRR]

Originally Posted by jotrout

Amazon blocked the shipment to California. Ugg!

That's strange, you can get it at Autozone.

https://www.autozone.com/motor-oil-a...81590_204030_0

[Old Goat Racer]

If ya see a sale on 10W30, Please post.

[Joe's Garage]

Still a decent price, if you can use (need) the really THICK stuff.

[Joe's Garage]

Originally Posted by jotrout

Amazon blocked the shipment to California. Ugg!

Sooner or later EVERYONE in KOMMIE-fornia drives to Las Vega$!

Let us know if we can help.

Good luck!

[STEELCITYFIREBIRD]

I use the cheapest oil they have at Walmart.
It's all the same ....

[F ROCK]

I tried the VR-1, 20w50 in my engine one time; The engine made a tremendous amount of noise when cold.
I switched back to 10/30 quick.

[78w72]

Originally Posted by PunchT37

Just bought 3 cases. I`m gonna use it in my new roller cam 455. Most say it`s too heavy. I`ll see if it blows up.

Used 20w50 in my old 455 for a looong time. Still fine today.

just curious but why do you want/need a high zinc 20/50 for a roller cam? & is the motor built to "race" specs with loose clearances to actually need the thick oil? the engine wont blow up, but would be happier with a 10/40 or 10/30.

[prostreet64]

I picked up a six pack of the 20w-50 VR1 at that special price of 23.99, but I also noticed last time I was in our Rural King store that they had the 20w-50 VR1 at about $4.00 a qt. as well. They don't always stock it but the price is usually competitive when it is on the shelf.

[jotrout]

Autozone it is! Thanks for the heads up

[PunchT37]

Originally Posted by 78w72

just curious but why do you want/need a high zinc 20/50 for a roller cam? & is the motor built to "race" specs with loose clearances to actually need the thick oil? the engine wont blow up, but would be happier with a 10/40 or 10/30.

It’s got full synthetic 10w30 in it now. It idles at 17 psi hot. I will try that thick oil. I am down here in the heat. If I see or hear something I don’t like, I won’t use it anymore. For that price, I will try it.

[67gtospud]

If you’re an advanced auto parts speed perks member and have $5off speed perks you can get individual bottles for $3.15/qt.