FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Hydraulic clutch conversion
Any one know of a source for a hydraulic clutch conversion setup ? 1970 GTO..
Sent from my SM-G955U using Tapatalk
__________________
"One ought never to turn one's back on a threatened danger and try to run away from it. If you do that, you will double the danger. But if you meet it promptly and without flinching, you will reduce the danger by half." - Winston Churchill |
#2
|
||||
|
||||
Mcleod racing makes one for a Chevelle. May require some modification but would think the basic is very close to same as GTO. https://www.mcleodracing.com/index.p...kit-78240.html
Bought the same on for my 64 but have not put it in yet.
__________________
64 Lemans hardtop 4spd, buckets |
#3
|
|||
|
|||
I purchased mine through American Powertrain, it is a RAM brand. A very nice feature to consider is a RAM product which one can adjust to have the clutch engage at any point in the pedal stroke. Right off the floor for spirited driving or mid way up/down or right at the top.
Tim john--- |
#4
|
||||
|
||||
I would give Bowler transmissions a call. They have a nice firewall mount for the MC and the Tilton 6000 series bearings are very nice.
Andrew
__________________
IG: projectgattago Please get in touch for Holley EFI tuning services. "You were the gun, your voice was the trigger, your bravery was the barrel, your eyes were the bullets." |
Reply |
|
|