[hvirgen]

It looks we have been on seatbelt kick so here's mine. I have a 72 T/A, with a production date of the 3 week in Dec 71, and standard interior, but optioned with custom stainless steel seatbelts. Can some one look at this picture and tell me which lap belt set do I install on the front seats?

[Formulabruce]

The TOP one is correct for your car

[RAM AIR 1967]

The top one is correct the hard cover to the door side.

[giles]

The bottom set is for '70 only (possibly '69?). They are a good find if the plastic shroud is in good shape. The shroud usually cracks at the ends where the tongue rests in the retracted position.

[hvirgen]

Formulabruce, Ram Air 1967 and giles,

Thanks, I wasn't absolutely sure if the early 72 custom belts had the same long hard cover as the standards belts. I've also got the small clear plastic clips for the headliner and the holders on the center console.

Now for the shoulder belts, can anyone verify or have pics of what the front clips used to wrap the elastic band around looked like? The current ones on my car look like a coat hangers only a little flatter and are snug against the headliner.

[pmdclassics]

The bottom belt retractor is identical to my 70 TA's.

[Formulabruce]

Originally Posted by hvirgen

Formulabruce, Ram Air 1967 and giles,

Thanks, I wasn't absolutely sure if the early 72 custom belts had the same long hard cover as the standards belts. I've also got the small clear plastic clips for the headliner and the holders on the center console.

Now for the shoulder belts, can anyone verify or have pics of what the front clips used to wrap the elastic band around looked like? The current ones on my car look like a coat hangers only a little flatter and are snug against the headliner.

I believe thats correct, Ill go look at one , now Im curious myself!