FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
What is the correct factory third member paint?
Currentlly in the middle of a frame off on a 60, does anyone know or remember if the third member in the rearend was painted black, or came in primer from the factory? or came natural finish?
Had a guy who has done several frame offs on 61's and 62's claim the third members were primer. Anyone know for sure?
__________________
|
#2
|
||||
|
||||
Not a 100% sure but believe they were in Red Oxide primer.
I have pulled quite a few rears that were in primer from parts cars.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#3
|
||||
|
||||
That is my understanding for those years as well, but don't know if it also applies to 1960.
|
#4
|
||||
|
||||
The rears I pulled were from 60's....
I have a 4.88 posi in shop that was pulled years ago...it's primer. Don't see any signs of it being black... Believe it came from the original (real) Arapaho that I found years ago... It hadn't been on track for eons..
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#5
|
||||
|
||||
A buddy of mines 62's were all red primer.
GT. |
#6
|
|||
|
|||
Quote:
|
Reply |
|
|