FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
MSD Billet advance stop bushing info
MSD Billet advance stop bushing info largest is 18 degree any size info to make 16 14 12 10 bushings ?
|
#2
|
||||
|
||||
You can take one of the bushings and get someone to custom make you different sizes. Or get inventive and make them yourself. That is what I did to taylor my timing.
__________________
68 Firebird. IA2 block, 505 cu in, SD Performance E-head, Solid roller 3600 weight. Reid TH400 4:11 gear. 29" slick. Best so far 9.95@134 mph. 1.43 60 ft. 76 Trans am, TKX .81 o/d, 3.73 Moser rearend, 468 with KRE D-ports, Doug headers, 3" Exh. |
#3
|
|||
|
|||
That is what i am doing but need the o.d. for sizing. Do you happen to have a record of yours ?
|
#4
|
||||
|
||||
Sorry Chrisp, I didn't write anything down on bushing sizes. I just had a few done, I believe in my case smaller.
__________________
68 Firebird. IA2 block, 505 cu in, SD Performance E-head, Solid roller 3600 weight. Reid TH400 4:11 gear. 29" slick. Best so far 9.95@134 mph. 1.43 60 ft. 76 Trans am, TKX .81 o/d, 3.73 Moser rearend, 468 with KRE D-ports, Doug headers, 3" Exh. |
#5
|
|||
|
|||
4secondsflat i think was the place that offered lock out bushings, and at one time would custom make them
i bought a set and use it at the time i was using advance bushings, i have no idea where they are now since i bought them so long ago and had some moves inbetween worked out nice too one of them i needed to slightly file one side so it would fit i don't recall what it limited advance to, but they worked out real well and were cheap don't know what hardware stores are near you, but i gather if you have some time and patience you might be able to find some bushings close to the size and do a little filing.... i've seen internet posts that some did that https://4secondsflat.com/MSD%20Distributor%20Tuning.htm |
The Following User Says Thank You to Don 79 TA For This Useful Post: | ||
#6
|
|||
|
|||
Excellent link
|
Reply |
Thread Tools | |
Display Modes | |
|
|