FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
SPEEDMASTER HEADS
Just saw on speedmaster site Black Friday sale
https://speedmaster79.com/Pontiac-38...-Cylinder-Head |
#2
|
|||
|
|||
Heads
I see theyvlist two complete heads. What is the difference?
|
#3
|
||||
|
||||
One if for a Hyd Flat Tapped Cam, the other a Hyd Roller.
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#4
|
|||
|
|||
head
I would be better ordering a flat tappet cam and can upgrade to roller later right? but if i order roller,I have to stay roller right?
|
#5
|
||||
|
||||
Not exactly, you can order the hyd roller and they should be about right for a moderate Solid Flat Tappet cam.
__________________
Johnny US Army Retired 1978 T/A 463 Pontiac, KRE 74cc 292CFM D-ports, Lunati VooDoo, V-max lifters, TKII, ATM 850 E85 carb, TCI TH-350 race tranny, 3600 converter 3.73 12 bolt 11.63@116.68mph 1981 T/A 4-speed 406 Pontiac, Merrick ported 6X heads, Comp 270S cam, Crosswind intake 750 Street Demon, 3.42 30 spline Eaton posi street car. 1980 Formula 350 Pontiac back burner project 1972 LeMans 350 Pontiac |
#6
|
|||
|
|||
I just bought a pair of bare heads for that price myself. I can build them later to fit whatever engine I put together in the future.
$957.00 for the bare set and free shipping. |
#7
|
||||
|
||||
Thank you for the pictures. I will definitely be having mine checked out. I also need to upgrade the valve springs.
|
#8
|
|||
|
|||
I was looking at the bare heads as they seem to be a good price. I did a little internet searching and as usual, mixed comments, but what I would do if you buy the heads complete is to take the heads to a machine shop and let them disassemble, clean, check valves/valve seats, and spring pressures.
Not a bad deal complete, but buying them bare would allow you to build them the way you wanted and matched for your engine specs. I don't know if this may actually wind up costing you more, but you would know what you have - just my opinion. |
#9
|
||||
|
||||
Has anyone ever flowed these heads and do they flow comparable to out of the box, unported E-heads?
__________________
Just a blind squirrel looking for a nut. |
#10
|
|||
|
|||
Holy ****, 1200/pr, complete???
__________________
Jeff Ianitello |
#11
|
|||
|
|||
heads
i tried ordering,kept getting error messages and of course,they are closed on the weekend
|
#12
|
||||
|
||||
__________________
" Darksiders Rule "
|
#13
|
|||
|
|||
Quote:
RPM Speed Shop Indy Other Shops Sell Ported 240CFM Iron Heads for $1995. Save Some Weight, Money And Gain 49CFM. Our Heads Flow 289CFM As Cast! Priced to get you Cruising instead of Dreaming at $795.00 Each with Free Shipping! "Buy It Now" and we'll also include a full set of Guide Plates FREE! Bare Round Exhaust Port Head with Seat and Guides. No Valves, Valve Springs, Retainers, etc. Valve Lift Intake Exhaust .100 76 72 .200 147 124 .300 213 156 .400 258 177 .500 269 195 .600 289 202 CFM on Superflo SF600 @ 28" |
#14
|
||||
|
||||
Quote:
With a very light clean up they flowed 300CFM. Castings look really good. Waiting on pistons to go on a 428 street engine so no results yet.
__________________
66 GTO Nostalgia Super Stock/Street Legal Car 421 CID, stock block, Wenzler Intake, 2- Carter 750 AFB's, 3.90 Gears, Full Factory Interior, Full Exhaust, Stock Suspension 3750LBS 9.77@136.99 Multiple NSCA/NMCA World Champion 66 GTO 389 3x2, 4 speed, 4.33 gear, Montero Red 33K original Miles 67 GTO 2dr Post, 428, Tri Power, 3.55 Gears 80 Trans Am Black SE Y84 W72 WS6 |
#15
|
||||
|
||||
no it says pair down below in the description. I was able to order a set this morning. I forgot to get the guide plates so if you try to order again, make sure you include them.
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
#16
|
|||
|
|||
Ya, I saw that. So you got a pair for $1200?
__________________
Jeff Ianitello |
#17
|
|||
|
|||
Quote:
i'm guessing this would work. Edelbrock 9667
__________________
1979 Firebird Trans Am 301/4spd (Now 428) 1977 Firebird Formula 400/Auto 2007 Grand Prix GXP 5.3L Last edited by 74Grandville; 12-02-2020 at 01:58 PM. |
#18
|
||||
|
||||
Pce251.1026
|
#19
|
|||
|
|||
speedmaster heads
I posted some pics and info in the race section on my speedmaster heads for those who may be interested.
|
#20
|
||||
|
||||
I just ordered sometime this morning but that is my assumption yes one pair of heads for 1100 and change plus damn tax
Machined for O-Ring: No Heat Crossover: No Quantity: Sold as a pair. Calculator Compression Calculator ORDER DETAILS PCE281.2165 Pontiac 389 400 455 215cc 72cc Ram Air IV Hyd-R Complete Aluminum Cylinder Head UPC:840136532415 Quantity:1 Unit Price:$1,114.70 $1,114.70
__________________
1969 carousel red firebird 455, richmond 5 speed 1964 540 gto 1971 lemans sport convertible 1972 Maverick under slow construction |
Reply |
|
|