FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
||||
|
||||
performer rpm intake pcv valve
obviously, this intake does not have a pcv valve provision in the best place. Is it possible to drill and tap this manifold for a equal division like the original 72 intake? I may just have to put the cast iron intake on and be done with it. The trade off doesnt seem reasonable to be for the weight savings but maybe there is a trade off somewhere.
__________________
72 Luxury Lemans nicely optioned |
#2
|
||||
|
||||
We try to run the PCV to the carburetor baseplate and the brake to the vacuum port on the #7 cylinder or put a fitting in the plenum.
|
#3
|
|||
|
|||
Let me know if u decide to sell the rpm
__________________
76 T/A 455, cnc chamber E heads,OF hyd roller ,yella terra shaft rockers 11.47 119 |
#4
|
||||
|
||||
Post #6 has a pic where a pcv fitting was added.https://forums.maxperformanceinc.com...d.php?t=661260
|
The Following User Says Thank You to 400 Lemans For This Useful Post: | ||
Reply |
|
|