FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
#1
|
|||
|
|||
71 T/A Shaker Ground Strap and Engine Grounds
I have searched this forum on this subject and found some info on. I have seen that there is a strap that connects from the rear bottom of the shaker to where? I think its somewhere on the firewall. What type of connection is used on the firewall? And where can I buy the parts I need to make the shaker work properly? If anybody has pics of the strap in use on the car would be fantastic. Also, I would like to replace all of the ground straps under the hood. Where are they all connected? Pictures always work great. Thanks,Walt.
__________________
----------- Even a blind squirrel eventually finds his nut's |
#2
|
|||
|
|||
The clip for the shaker ground wire is attached to the firewall under the same bolt/screw that holds the wire harness clip -- upper center of firewall face. Your engine ground harness should attach to the firewall below and to the left almost directly behind the valve cover.
This is how it is on 70 cars. I imagine it's the same for yours. |
#3
|
|||
|
|||
Shaker
The phone number for the guy who make the functional shaker parts is 512-789-3005 or you can reach him by pontiacplus@suddenlink.net
|
#4
|
||||
|
||||
Quote:
|
The Following User Says Thank You to Norwood For This Useful Post: | ||
#5
|
||||
|
||||
Quote:
First picture is the clip on the firewall were the graund wire goes for the shaker! second picture is the ground wire on the shaker,its about 7" long. third picture is the ground wire on the back of the pass side head to the firewall,that wire is about 8.5" long. my car is a 72 not a 71 maybe the same? Last edited by tommie69; 11-06-2011 at 06:30 AM. |
#6
|
|||
|
|||
Thanks for the pics Tommie. Any idea where I could get a female spade mount like you showed in the pic? Also, I could not make out what type bolt is used to mount the ground strap to the bottom of the shaker. I would like to also see some pics from some other members especially for the 71 T/A. Any other grounds other than the one on the firewall? Thanks, Walt.
__________________
----------- Even a blind squirrel eventually finds his nut's |
#7
|
||||
|
||||
Great Pics Tommie....
|
#8
|
||||
|
||||
Not an easy one to make. I’m pretty sure that it is a generic GM part that was used for many applications. This is the best pick I have handy I will get and post a better one tomorrow
|
#9
|
||||
|
||||
Here's the parts breakdown.
Unfortunately item #46 "Terminal - adapter to ground strap" says "N.S." (not serviced) |
#10
|
||||
|
||||
PN was 8900232. I don't know of a source.
__________________
So long, farewell. |
#11
|
||||
|
||||
Other than the million of them that must be in junk yards across America
|
#12
|
|||
|
|||
My 70 TA is missing this ground terminal. Does anyone have one to sell or know of a source? I would be extremely grateful.
Last edited by wrightd; 05-24-2022 at 01:57 PM. |
#13
|
||||
|
||||
Shaker ground clip
|
#14
|
||||
|
||||
Yup that’s what we need. Is it one or two per car?
|
#15
|
||||
|
||||
I think it's just one for the ground strap so it can be pulled out and allows the shaker to be pulled off the car. I don't recall ever seeing that do-hicky thing used for another application.
|
#16
|
|||
|
|||
2 per car. One for the shaker and one for the strap to the back of the head.
TS |
#17
|
||||
|
||||
Functional shaker had ground strap know. Other shakers too?
__________________
Mike/Illinois |
#18
|
||||
|
||||
My 73 SD does not have a shaker ground. Just block to firewall ground.
|
#19
|
||||
|
||||
I think just one. The head ground strap on my car is screwed directly to the firewall
|
#20
|
||||
|
||||
Cool. When are you going to have them ready? LOL
|
Reply |
|
|