[adam woodmancy]

472Pontiac 4.205x4.25
Just bored,honed,and decked. All new coated Clevite Bearings,
new freeze plugs.
New ARP main studs.
Factory main caps.
New Canton 7 qt pan and pickup.
New Melling 80# oil pump and hardened oil pump shaft. B.O.P. engineering Viton rear main seal and one piece pan gasket.
Brand new cast timing chain cover from Jim Butler Performance.
New cast oil filter housing from Jim Butler Performance. New Eagle 4.25 stroker crank New Eagle 6.8 H Beam rods New Ross Flat top pistons. New Total Seal rings. Filed and gapped for up to 150 shot of N2O
Billet Double Roller Timing chain and gear.
Assembly is fully balanced
Lunati Solid Street Roller Cam # RRC-248-555 which is .248/.555 lift with 1.5 rockers, .590 lift with 1.65 with 112 lobe separation.
B.O.P. engineering Aluminum Valley Pan with PVC provision New Meziere Electric Water Pump
Block is not filled.
Have over 5 k parts and labor in shortblock.
Shortblock assembled
$3,500 obo




SD performance 340/350 cnc 87 cc heads. 2.20/1.74 valves with titanium retainers set up for solid roller
SD cnc northwind intake for heads. 4150 flange
850 holley d.p. carb
Heads and intake are brand new, and cost over $3700

$3,500 for heads, intake, carb







$6,000 for all.
Shortblock, heads, intake and carb.
Located in central ,IL

Will not separate heads and intake.

Expecting to make 600 hp on pump gas with this engine.

also have a set of brand new hedman husler round port headers for 68-72 a body
Coated , over $700 new, asking $500.

RACERMX38@HOTMAIL.COM
or
309-241-3497

Thank you. Adam