FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
![]()
'67 400, 4" Scat crank, Pro-Gramm main caps with ARP studs.
3/4 length Tomahawk windage tray, Canton oil pan. Issue is the windage tray hits the ARP studs before the retaining bolt holes mate up with the tapped caps. About 3/8" standing off, too much to shim IMO and besides, the tray hits the oil pump at that height too. Do I drill out the tray and let the ARP studs poke through? |
|
|