FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Pushrod rubbing guide plate/head
I bought a new engine with dyno time only on it.
I pulled it apart to change the cam and noticed the pushrods are rubbing against the guide plates/ head. In the pics, you can see the dark marks on the pushrods. I can feel a slight ridge in the pushrod with my finger nail where the dark marks are. Do I just clearance the area, replace the pushrods, and check for interference? I'm thinking of using a hand file (fine rat tail) and sand rolls to clearance the area. Is there a better way? |
|
|