FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Wrong Cam Bearings?
I ordered a set of new cam bearings. I didn't bother looking at the picture before ordering. I did not remove the old cam bearings, the machine shop did, and they did the shake-n-bake, and get didn't return the removed bearings, so I have nothing on hand to compare to. These are the bearings I ordered:
https://www.summitracing.com/parts/dur-pp-4t They don't match the holes in the block at all. The cam bearing bores have 1 oil hole in the bottom of bearings 1, 3 and 5, and a hole in the top AND bottom of bearings 2 and 4. These bearings each have 3 holes in a delta. I got the part number from the Butler website, but the picture they have shows only one hole in all 5 bearings. I'm kinda confused Last edited by GoreMaker; 04-20-2022 at 11:48 PM. |
|
|