[67Sprint6]

I have had a heck of a time finding front wheel studs for 1967 Lemans drum brakes. Dorman sells the 610-114 as a 65-72 lemans drum brakes stud, but they do not really fit. They have no shoulder for the drum to ride on. The brake drum has obvious play side to side and up and down.
I have tried the new CPP assembled hub with studs -- same problem. The studs lack a shoulder for the drum. The drum can rotate from side to side on the studs. Seems like this could get off balance.
I went through the Dorman catalog and found a 1970s Dodge/Plymouth part that had the same knurl size, a shoulder for the drum (within .010 inch), and was only a little longer (but still seems to fit under the Rally wheel lugs). Dorman 610-168. Seems like it should work.
Is there a better solution out there I haven't found (short of converting to discs)? I am pretty far down this rabbit hole already.
- The first picture shows the wheel studs marketed as a replacement ... notice the play the drum has on the studs.
- Second picture OEM knurl diameter
- Third picture shows Dorman 610-168 Dodge knurl diameter
- The last picture shows the OEM 67 Lemans stud, the Dorman 610-168 Dodge stud and the aftermarket replacement Pontiac Lemans drum stud Dorman 610-114.