FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Where can I buy little drill bits?
Just got Cliff's book, and I'm trying to find the tiny little drill bits needed to open up the holes in the Q-jet. Sears, Lowes, and Ace didn't have them. Is there a place online I can buy them?
|
#2
|
|||
|
|||
you sure can, call Cliff. He has the kit you need ready to ship.
|
#3
|
|||
|
|||
at the auto store. must be ordered
|
#4
|
||||
|
||||
I've found that several Hobby (model airplane/model car) Stores in the Austin area carry them along with pin vises and other small tools that come in handy on carbs.
Ogre
__________________
“Man will ultimately be governed by God or by tyrants.” -- Benjamin Franklin - (1706-1790) US Founding Father |
#5
|
||||
|
||||
Can find them on E-pay too.
__________________
North Dakotas fastest REAL GTO 10.10 @ 131 MPH in the 1/4 Hoping to get it back together some year. www.jandjrepairandrestoration |
#6
|
||||
|
||||
Yes, I've seen them at Hobby Lobby which is of course, a national chain.
|
#7
|
||||
|
||||
Snap on dealers usually have them on their trucks too. Another source is a tool and die or precision tool supply jobber.
|
#8
|
||||
|
||||
www.fastenal.com
or go in to the store, they have a lot in stock.
__________________
************************************************** ******************* 73 TA 4 spd #'s match red/white - "STOLEN" AT TERRY SPEAR's SHOP IN Columbia TN ~mid 2014 Last offical pic of the car can been seen here: http://clubs.hemmings.com/pontiactn/...%20-%20rev.pdf People have seen it posted FS on Craigs List back in late 2013 early 2014.... ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ IF YOU HAVE ANY INFO ABOUT IT PLEASE CONTACT ME!!! Last edited by cdoggy81; 10-12-2007 at 12:26 AM. |
#9
|
||||
|
||||
I order stuff like that from McMaster-Carr, by telephone. They have a warehouse about 60 miles from me, so I receive orders the next day.
__________________
Anybody else on this planet campaign a M/T hemi Pontiac for eleven seasons? ... or has built a record breaking DOHC hemi four cylinder Pontiac? ... or has driven a couple laps of Nuerburgring with Tri-Power Pontiac power?(back in 1967) ... or has a Pontiac born the same year as Jim Wangers? (1926} |
#10
|
||||
|
||||
Enco.............
__________________
"It is foolish and wrong to mourn the men who died. Rather we should thank God that such men lived."- General George Patton "Perpetual peace is a futile dream."-General George Patton "I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them."-Thomas Jefferson "Any society that would give up a little liberty to gain a little security deserves neither and will loose both."-Benjamin Franklin |
#11
|
||||
|
||||
Hi,
Try Harbor Freight if you have one in town. Stuff like that is usually locked up behind glass display cabinets. Mike
__________________
1968 Pontiac GTO 462CID, 4-Speed Manual, 3.55 rear. Aleutian Blue exterior, 219 Teal Blue interior. Chrome bumper, AM & 8-Track and Rally II Wheels |
#12
|
||||
|
||||
Quote:
__________________
************************************* 1968 Lemans. 37,000 original miles. GTO clone. 462ci/KRE 290 heads. UltraDyne 280/288 Solid/850 Qjet by Cliff/Performer RPM/TSP 9.5" in TH400/8.5" 3.42 gears/3950# Race weight/12.58@106 at Bandimere speedway high altitude |
#13
|
|||
|
|||
I got a little hand held bit holder with a small set of the tiny drill bits at my local Rural King (farm store) for about $10. They were in the welding supply section.
|
#14
|
||||
|
||||
Cliff Ruggles sells them (good ones made in the USA that don't break the first time you go to use them) along with standard sets of wire drills that you need for some of the other orifices in the carb (idle mixture passages, etc.)
__________________
"XE cam basher" |
#15
|
||||
|
||||
I got the very smallest ones from Stuller, a jewelers supply house. And the larger ones from Sears.
__________________
frittering and wasting the hours in an off hand way.... 1969 GTO, 455ci, 230/236 Pontiac Dude's "Butcher Special" Comp hyd roller cam with Crower HIPPO solid roller lifters, Q-jet, Edelbrock P4B-QJ, Doug's headers, ported 6X-8 (97cc) heads, TKO600, 3.73 geared Eaton Tru-Trac 8.5", hydroboost, rear disc brakes......and my greatest mechanical feat....a new heater core. |
#16
|
||||
|
||||
__________________
1969 GTO hard top ~ Std bore 400, '70-RA3 block, 670 heads, Bal. & Blue... M22, 12-bolt w/3:55s |
#17
|
|||
|
|||
Avoid using them with hand held power tools as they are easy to break. I use a hand chuck (from an old small hand drill)for my pin vise. If I feel I need to use my drill press I use very low speed and pressure. I can put my hand chuck in the drill press if the press chuck wont hold the smaller bits.
|
#18
|
||||
|
||||
Try Grainger or McMaster Supply.
__________________
Alan Tomorrow is often the busiest day of the week. |
#19
|
||||
|
||||
Got mine at www.drillbitcity.com
__________________
Matt 1962 Grand Prix - Cameo Ivory|389 4sp|One-Owner Survivor 1964 GTO HT - Silvermist Grey|389 3x2s 4spd|A/C|Hurst Wheels|Frame-off|SOLD 1965 GTO Post - Mayfair Maize|421 3x2s TKO600|Pro-Touring| 1966 GTO HT - Barrier Blue|389 3x2s 4spd|Red Fenderliners 2005 GTO Coupe - Yellow Jacket|Magnacharged LS2 6sp|543hp/561tq|SOLD 2006 GTO Coupe - Spice Red|LS2 6sp|20k orig miles |
#20
|
||||
|
||||
Just bought a 115 piece set for 25 bucks on sale at harbor freight. Had all the sizes I need.
|
Reply |
Thread Tools | |
Display Modes | |
|
|