FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#21
|
|||
|
|||
As mentioned we made 16 pulls in our recent dyno session. After a few initial pulls the engine was pretty consistent throughout the whole session. We could of made more pulls but we were not there chasing numbers, nor making equipment changes. Except for a different cam it was the same basic combination as before so we had the advantage of knowing the previous jetting and timing to start with. Changed the break-in oil to synthetic after pull number eight. Only made one jetting change and only one timing change. Started with the recommended valve lash and made one change to a tighter setting, then went back to the original setting.
.
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#22
|
|||
|
|||
We dyno'd with the same intake manifold and carb as used before the cam change, so the comparison is close to being apples-to-apples. But I'm now running direct port fuel injection and the EFI controls and sensors will change things. The shop was not equipped to dyno with my FI system.
.
__________________
'70 TA / 505 cid / same engine but revised ( previous best 10.63 at 127.05 ) Old information here: http://www.hotrod.com/articles/0712p...tiac-trans-am/ Sponsor of the world's fastest Pontiac powered Ford Fairmont (engine) 5.14 at 140 mph (1/8 mile) , true 10.5 tire, stock type suspension https://www.youtube.com/watch?v=qDoJnIP3HgE |
#23
|
||||
|
||||
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
#24
|
||||
|
||||
Lol. I guess I better fess up. 790 hp. 700 torque.
Charles |
#25
|
||||
|
||||
Please give us the complete break down of the parts AND COMBO, AND A COPY OF DYNO SHEET!! Congrats!!
__________________
Darby 74 Grandville 2Dr 455 c.i 4550# 2011 1.60 60 ft,7.33@94.55-11.502@117.74 2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft, 6.314@108.39 9.950@134.32 M/T 275/60 ET SS Drag Radial 2023,(Pontiac 505) 1.27 60 ft, 5.97@112.86, 9.48@139.31.... 275/60 Radial Pro's |
#26
|
||||
|
||||
Nice!!! That is real good power. Congrats
|
Reply |
Thread Tools | |
Display Modes | |
|
|