FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Multi valve Pontiac head?
Since there are quite a few aftermarket cast and a few billet head choices out there to choose from, it would seem the next step would be a multi valve layout.
Anyone know if some work has been done on a 3 or 4valve layout? Just conversation.
__________________
1963 Cat SD Clone (old school) streeter 1964 GTO post coupe, tripower, 4speed (build) 1965 GTO 389 tripower, 4 speed, driver 1966 GTO dragcar 1966 GTO Ragtop 1969 Tempest ET clone street/strip 1969 GTO Judge RA lll, auto 1969 GTO limelight Conv. 4speed go and show (sold) 1970 GP SSJ 1970 GTO barn find..TLB…390 horse?….yeh, 390 1972 GTO 455 HO, 4 speed, (build) 1973 Grand Safari wagon, 700hp stoplight sleeper 525ci DCI & 609ci LM V head builds |
#2
|
||||
|
||||
I agree, Would be the next step for all out performance.
I know alot of guys with less cubes and 4 valves per cyl making alot more power then the larger ci motors with 2 .. I think theres a guy on FB that was doing something like that for a Pontiac..
__________________
My Half AN Injun..... |
#3
|
||||
|
||||
there was something posted on here about a guy working on a three valve head, iirc. had pics too.
|
#4
|
|||
|
|||
Mac McKellar knew the advantages of multi-valve heads in the early 60's. The couple of times I was fortunate enough to talk with him the conversation always moved toward 3 and 4 valve designs. He was also convinced the maximum benefit would come from OHC multi-valve designs as well. But it was a time of cheap fuel and low cost engines. Need more power, just make the engine larger, much less expensive than exotic camshaft drives and 24 or 32 valves. Some of the benefits are negated if a pushrod system is retained, but OHC, I would love to see.
|
#5
|
|||
|
|||
The 3 valve 428 car McKellar developed was given to him by GM as a retirement gift. Used to cruise it around town.
Oldsmobile made a 600HP 455 with a Q jet. 4 valve heads. My Tundra has 4 valve DOHC Hemi heads. Its a very interesting engine. Smooth and powerful. The fly by wire throttle has some sort of lag. If it was a direct cable it would shred the tires. 14.56 in a 5700lb truck is impressive. Dead stock, just let the rear tires down to 20lbs and stab it in "drive". I would love to get a engine and 6 speed trans out of a junkyard and shove it in a old Chevelle or something like that (no Pontiac's). In conversations with high end head guys about 4 valve heads they say its nite and day better than any 2 valve head. Its where its at these days. I always wondered why GM went with the 2 valve pushrod LS vs something like Toyota did with the 5.7 I Force. Toyota has to make special de tuned heads and blocks or they would run away from everything in NASSCAR. I would like to see a takeoff of the 2 valve SOHC Hemi Pontiac tried in 1970. But in 4 valve. It would have real Pontiac roots. Even the purists would have to admit that. Its one way we could get around the bore space limits of our engines. Seems the old PMD engineers thought the same thing. |
#6
|
||||
|
||||
The value on the intake side is pretty big. The value in the exhaust side is significantly less with the right valve timing.
|
#7
|
||||
|
||||
The factory in the early 60s had a 3 valve head 421 built it was duel overhead Camed ( one Intake , two Exh) that had a the Intake ports layed out like the RA5 head and this is what to this day pisses me off when people say that the RA5 head was patterned after the later Ford tunnel port head, when it was not!
The RA5 head was based off of the head from this 1963 motor.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#8
|
||||
|
||||
I forgot all about that three valve head. Somewhere I have some pictures of that thing.
__________________
When people tell me they HAD to sell their car when they started a family, I show them the three car seats in the back of my 69Trans-Am..............and we didn't even use car seats back then!! |
#9
|
|||
|
|||
Why?
__________________
John Marcella Marcella Manifolds Inc. john@marcellamanifolds.net ph. 248-259-6696 |
#10
|
||||
|
||||
At exhaust valve opening / low lift there is a huge difference in pressure differential as to what the intake valve will see.
If we look at a 535 ci, (bore = 4.35", stroke = 4.5", rod = 6.75") 14.5:1 cr that has a peak cylinder pressure of lets say 1600 psi @ 12.5 ATDC there will still be about a 10th of that @ EVO. Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#11
|
|||
|
|||
Quote:
I was busting AQ's chops
__________________
John Marcella Marcella Manifolds Inc. john@marcellamanifolds.net ph. 248-259-6696 |
#12
|
||||
|
||||
how about a MMMVB? Marcella Manifolds Multi Valve Billet?
or take Dons Vs and intake and....just a few beads later.... walaaahhh ....done!
__________________
1963 Cat SD Clone (old school) streeter 1964 GTO post coupe, tripower, 4speed (build) 1965 GTO 389 tripower, 4 speed, driver 1966 GTO dragcar 1966 GTO Ragtop 1969 Tempest ET clone street/strip 1969 GTO Judge RA lll, auto 1969 GTO limelight Conv. 4speed go and show (sold) 1970 GP SSJ 1970 GTO barn find..TLB…390 horse?….yeh, 390 1972 GTO 455 HO, 4 speed, (build) 1973 Grand Safari wagon, 700hp stoplight sleeper 525ci DCI & 609ci LM V head builds |
#13
|
||||
|
||||
Probably easier to ask Jeff Kauffman to do one.
He may be already doing something. He's already did a lot of things that the Pontiac racer needs or wants.
__________________
John Wallace - johnta1 Pontiac Power RULES !!! www.wallaceracing.com Winner of Top Class at Pontiac Nationals, 2004 Cordova Winner of Quick 16 At Ames 2004 Pontiac Tripower Nats KRE's MR-1 - 1st 5 second Pontiac block ever! "Every man has a right to his own opinion, but no man has a right to be wrong in his facts." "People demand freedom of speech to make up for the freedom of thought which they avoid." – Socrates |
#14
|
||||
|
||||
Quote:
Stan
__________________
Stan Weiss/World Wide Enterprises Offering Performance Software Since 1987 http://www.magneticlynx.com/carfor/carfor.htm David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software http://www.magneticlynx.com/DV Download FREE 14 Trial IOP / Flow Software http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php Pontiac Pump Gas List http://www.magneticlynx.com/carfor/pont_gas.htm Using PMD Block and Heads List http://www.magneticlynx.com/carfor/pont_pmd.htm |
#15
|
||||
|
||||
there was an SD-4 hemi head - strikingly similar to the Quad4 which came out at around the same time iirc...
I missed out on an auction for a nearly complete setup over a decade ago... I don't know if it was ever officially released as a part of the SD-4 program - even though I seem to recall that around 1987 there was a hemi-head SD-4 "GTO" (Grand Am coupe) concept car in print... I still think it would be pretty cool to find a nice solid 1985-1989 Grand Am SE coupe with the Iron Duke & 5 spd (I believe that 1989 was the last year you could setup an SE with that drivetrain) - and swap a complete SD-4 setup on it; I get made fun of for liking those third gen Grand Am's (and Sunfires), but they are great little cars that can be alot of fun. https://youtu.be/gIqRnfh-3k8
__________________
1970 Formula 400 Carousel Red paint on Black standard interior A no-engine, no-transmission, no-wheel option car. Quite likely one of few '70 Muncie three speed Formula 400's left. 1991 Grand Am: 14.4 @ 93.7mph (DA corrected) (retired DD, stock appearing) 2009 Cobalt SS: 13.9 @ 103mph (current DD; makes something north of 300hp & 350ft/lbs) Last edited by unruhjonny; 03-25-2019 at 04:32 PM. |
#16
|
||||
|
||||
Valvetrain is truely the limit to my Fortitude, and surely other pay cubic dollars to get the Valvetrain to be on-par with the Bottom-End.
A blend of the OHC-6 with the Ford Modular Engine and YOU ARE HERE; a decent topology. Roller followers being the most valuable player. HP growth as seen in the Modular Engine APPLICATiONS as a guide. Scale to the PMD Bore and I think there will be excitement. |
#17
|
||||
|
||||
Quote:
__________________
1963 Cat SD Clone (old school) streeter 1964 GTO post coupe, tripower, 4speed (build) 1965 GTO 389 tripower, 4 speed, driver 1966 GTO dragcar 1966 GTO Ragtop 1969 Tempest ET clone street/strip 1969 GTO Judge RA lll, auto 1969 GTO limelight Conv. 4speed go and show (sold) 1970 GP SSJ 1970 GTO barn find..TLB…390 horse?….yeh, 390 1972 GTO 455 HO, 4 speed, (build) 1973 Grand Safari wagon, 700hp stoplight sleeper 525ci DCI & 609ci LM V head builds |
#18
|
|||
|
|||
Quote:
I have had a 4 valve design in my mind for about the last 3 1/2 years now. And the groundwork for this to become a reality was laid down last month ! However it is for a very specific market. And I have serious concerns whether it will be outlawed within its classes that it's intended for. A 4 valve retro fit is not something that I'm intrested in pursuing. To do something really good is complicated And extremely expensive for Valve train parts. And on a retrofit it gets even more complicated and the design gets compromised.
__________________
John Marcella Marcella Manifolds Inc. john@marcellamanifolds.net ph. 248-259-6696 |
#19
|
||||
|
||||
Because it take energy to suck the ****e in. On the exhaust side only takes waste energy management which is free. The exhaust is not so important. You're trading off expansion vs. pumping work.
|
#20
|
||||
|
||||
Are you sure? I"m pretty sure I can keep up. And shouldn't you be teaching this? Why are you asking me? Or is the magic fading? LOL
Last edited by Aaron Quinton; 03-25-2019 at 11:02 PM. |
Reply |
Thread Tools | |
Display Modes | |
|
|