FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
I am looking to replace the original 3 core on my 64 and thought about putting in a Desert Cooler 4 core, until I saw a radiator on EBay from a company called RK Industries. Their prices are compariable to the Desert Cooler and I was wondering if anyone had any experience or knowledge of this company. Their standard 4 core has 164 cooling tubes and their top of the line has 248 cooling tubes. I have completely rebuilt the original engine. It is bored .030 over, line bored the crank, put in a slightly bigger cam, 480 lift 286 duration, moly rings on TRW forged pistons, valves, valve springs, decked the block planed the heads, ah you guys no the rest. the car does have PS, but no air.
Any info is greatly appreciated. Thanks, Jim
__________________
http://www.geocities.com/jims64gto |
#2
|
|||
|
|||
I am looking to replace the original 3 core on my 64 and thought about putting in a Desert Cooler 4 core, until I saw a radiator on EBay from a company called RK Industries. Their prices are compariable to the Desert Cooler and I was wondering if anyone had any experience or knowledge of this company. Their standard 4 core has 164 cooling tubes and their top of the line has 248 cooling tubes. I have completely rebuilt the original engine. It is bored .030 over, line bored the crank, put in a slightly bigger cam, 480 lift 286 duration, moly rings on TRW forged pistons, valves, valve springs, decked the block planed the heads, ah you guys no the rest. the car does have PS, but no air.
Any info is greatly appreciated. Thanks, Jim
__________________
http://www.geocities.com/jims64gto |
Reply |
|
|