FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
69 Tempest w/drums
I have spindles, mounts etc, etc but....the caliper mounting bracket to spindle bolts were missing on one side. When I called to order these bolts I was told they threaded into the spindle. The one set I took off went thru the dust shield, mounting bracket, spindle and had a nut on the back side. Are there 2 types or did I get a bad set? Mike |
#2
|
|||
|
|||
69 Tempest w/drums
I have spindles, mounts etc, etc but....the caliper mounting bracket to spindle bolts were missing on one side. When I called to order these bolts I was told they threaded into the spindle. The one set I took off went thru the dust shield, mounting bracket, spindle and had a nut on the back side. Are there 2 types or did I get a bad set? Mike |
#3
|
|||
|
|||
depends, the bottom two are bolts with nuts on the back side to hold the tie rod bracket to the spindle, while the top is a bolt that threads into the spindle.
|
#4
|
|||
|
|||
It must be the bottom 2. Fine thread with a good sized shoulder. Know where I can find these??
|
Reply |
|
|