FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
i have a 326 tempest in need of heads. i have 670 heads and manifold. what pushrods do i use 326 or 400? can any body tell me anything i may need to know? will motor run any better Thanks
|
#2
|
|||
|
|||
i have a 326 tempest in need of heads. i have 670 heads and manifold. what pushrods do i use 326 or 400? can any body tell me anything i may need to know? will motor run any better Thanks
|
#3
|
||||
|
||||
Use the Pushrods for a 67-up 400 engine.
__________________
Try calling CRUSHPROOF! 512-386-9889 |
#4
|
||||
|
||||
If you swap over 1.65 rocker arms when you put on the new heads, you will get a little more cam and perforance if your carb and exhaust are up to it.Sometimes you can use them just on the exhaust side and gain some breathing.
|
Reply |
|
|