| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
06-03-2001, 09:56 PM
|
||||
|
||||
Does anyone know if 1964-1966 389 rocker arms will work on a 1962 389?
Thanks! "Why that's impossible...but it happened!"
__________________
"An over torqued bolt is already half broken" |
|
#2
06-03-2001, 09:56 PM
|
||||
|
||||
|
Does anyone know if 1964-1966 389 rocker arms will work on a 1962 389?
Thanks! "Why that's impossible...but it happened!"
__________________
"An over torqued bolt is already half broken" |
|
#3
06-11-2001, 02:18 PM
|
||||
|
||||
|
Yes they work. But the early engines were set up for through the rocker stud oiling. You have to do one of two things.
1. remove the heads and install plugs blocking the galley to the head. Then use the later pushrods and rockers with the oil hole. 2. make sure that the pushrods do not have the oil provision (Can't run through) and just use the later rocker.(Look at push rod and make sure that you can't see the oil hole and be able to blow through them) ------------------ Gatomon A car is cheaper than a girlfriend. Better than a wife. If it gives you trouble you can park it and forget about it!
__________________
Try calling CRUSHPROOF! 512-386-9889 |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
