[Z Code 400]

I wanted to bring this post back up to the top, as a couple of people have recently asked me for the information.

Hope this is helpful...Robert

[Z Code 400]

Based on an idea from Larry Navarro, I have found that a brass acorn nut makes a great contact point on the clutch release lever. You can thread a steel or brass coupler onto the threaded adjuster rod and tighten it against the acorn nut. This will give you an easily accessible means of adjusting the clutch...Robert

[Z Code 400]

Larry,

I cannot get over how good that brass acorn nut works and it gives the pedal a very smooth feel. Thanks for the idea...Robert