FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
'67 GTO Ram Air Pan
I have a Ram Air pan for a '67 GTO that I would like to sell. This was used on a GTO race car, running a big block Chevy and must have been modified a bit to still fit unter the stock hood. The front of the pan looks like it was trimmed a little bit, I'm not sure how much exactly, but it doesn't look like too much. I don't know if the rear of the pan was trimmed at all. The AIR tube was shortened. There is still a tube there, but the elbow is gone. There are also some minor dings in the bottom of the pan where it looks like it was "clearanced" to fit the vent tubes of a Holley carb. The pan only has minimal surface rust where the seal was attached. This did still have foam attached to it and that was taken off so better pictures could be taken to give a better idea of what exactly was done to the pan. I'm asking $175 for this piece shipped. If you're thinking about buying a repop to modify, this would be a cheaper alternative and you can actually have an original part. If you are interested, please look at the pictures carefully. I can take more pictures if there are any areas that you would like to see a better shot of. I prefer that you contact me by email rather than PM. bigvick@q.com
Thanks, Troy
__________________
'80 Grand Lemans Was 301 C.I. Will be bigger soon. 00 GTP NBM / Graphite, Stock Sold Aug. 2011 70 GTO Black / Black TH400 460 CID, 542 FWHP, 580 FWTQ (Sold, Fall '09) 04 GTO Black / Black M6 Back to bone stock and sold, fall '05. |
Reply |
|
|